Incoloy® Alloy 825 Round Bar, WERKSTOFF NR.2.4858 Round Bars, Incoloy Alloy 825 Round Bar, Incoloy 825 Round Bars, Incoloy Alloy 825 Bars, JIS NCF 825 Incoloy Industrial Round Bars Stockist, ASTM B425 Incoloy 825 Round Bars Manufacturers in India, Alloy 825 Bars Supplier in Mumbai, India.
Incoloy 825 Round Bars are nickel-chromium-iron based alloys that are corrosion resistance. These alloys can work well in extremely high or elevated temperatures due to good corrosion features. It is also known for stress corrosion resistance. Nextgen steel & alloys are the most famous and acclaimed distributor and manufacturer of Incoloy bars. We provide clients all the test certifications so that clients can get assured material. Our certification and documentation meet all the highest industry standards.
Incoloy round bars have been sold out nationally as well as internationally for years in the wide range. Since we offer round bars at cost-effective prices, the clients get multiplied every year. These bars can be accurately used in applications where there is a requirement of high-temperature. You can obtain these round bars both in specified length, size, dimension as well as specification and custom-made thickness and size. We greatly fulfill all the demands of our clients. In addition to this, you can obtain it in the various finish, surface, form, and grade.
Table Of Content
Alloy 825 Hex Bars Suppliers, ASME SB425 Incoloy® Alloy 825 Flat Bars, Incoloy® 825 Polish Bars, Incoloy 825 Bright Bars, Incoloy 825 Square Bars Exporter, 825 Incoloy Alloy Rectangular Bars, UNS N08825 Round Bars Leading Manufacturers in Mumbai, India.
Marking and packing-
Our round bars are well packaged so as to make sure that there would be no rust and damage during the transit. We pack the round bars in standard wooden cases and mark them with size, lot no, trademark and grades.
Test certification-
Incoloy round bars are subjected to various tests such as test report, PMI testing, third-party inspection, ultrasonic test, and mill test certification too. Our supplied round bars very well comply with raw material quality standards.
You can get the incoloy 825 round bars no matter where you reside at low prices.
Standard Specification For Incoloy 825 Round Bars
Specifications : ASTM B425 / ASME SB425
Dimensions : ASTM, ASME and API
Size : 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length.
Length : 3 to 6 meter, Custom Cut Lengths
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Condition : Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
Incoloy 825 Round Bar Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Differnt Types of Incoloy Alloy 825 Round Bars
- Incoloy 825 Round Bars
- Incoloy Alloy 825 Bars
- 825 Incoloy® Round Bars
- B425 Incoloy 825 Bars
- Incoloy 825 Round Bar
- Incoloy DIN 2.4858 Bar
- UNS N08825 Cold Drawn Steel Bars
- Incoloy 825 Hexagonal Bars
- Incoloy JIS NCF 825 Hot Finish Bar
- Incoloy® 825 Cold Finish Round Bars
- Incoloy 825 Cold Rolled Bar
- 825 Incoloy Hot Rolled Round Bar
- 825 Incoloy® Bars & Rods
- Incoloy 825 Round Rod
- Incoloy 825 Half Round Bar
- Alloy 825 Pump Shaft Quality Bars
- Incoloy® Alloy 825 Bar
- Incoloy Alloy 825 Bars
Chemical Composition of Alloy 825 Round Bars
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Mechanical Properties of Incoloy® 825 Bars
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
People Also Searched For
825 incoloy alloy hexagon bar size, 825 incoloy alloy round rods distributor, incoloy 825 bars / rods, incoloy® 825 cold drown bars stockist in india, incoloy 825 hex bars chemical composition, alloy 825 round bars suppliers in india, incoloy 825 bars suppliers in india, 825 incoloy hot rolled bars stockist in mumbai, incoloy alloy 825 rod standards, 825 incoloy rectangle bars stockholder, incoloy 825 round bars, jis ncf 825 incoloy round bar, incoloy® alloy 825 round bars stockist in india, incoloy alloy 825 bar manufacturers in india, astm b425 / asme sb425 incoloy alloy 825 round bars, incoloy alloy 825 half round bar dimensions, incoloy alloy 825 triangle bar exporter in mumbai, alloy 825 cold finished bar application, incoloy alloy 825 bars supplier in mumbai, 825 incoloy polish bar stock, 825 incoloy® round bars, incoloy 825 bars price list, 825 incoloy alloy bright bar exporter in mumbai, incoloy 825 rods specification, alloy 825 hexagonal bar exporter in india, incoloy alloy 825 flat bar mechanical properties.